Skip to content

Documentation Blog Roadmap FAQ Shop

CTRL K

Русский
English

CTRL K

Documentation
Blog
Roadmap
FAQ
Shop

Русский
English

Edit this page on GitHub →

Firmware

Select the device model. The available firmware files will appear after selection

Device

No devices found

Check the model, revision, and firmware type before downloading

RMK — current wireless devices

K:04

Download — Left half Download — Right half

How to update the firmware — K:04

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — current wireless devices

K:04 Mini

Download — Left half Download — Right half

How to update the firmware — K:04 Mini

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — current wireless devices

K:04 Micro

Download — Left half Download — Right half

How to update the firmware — K:04 Micro

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — current wireless devices

Trackball Mini v3.1

Download — Firmware

How to update the firmware — Trackball Mini v3.1

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — current wireless devices

Trackball Royale

Download — Firmware

How to update the firmware — Trackball Royale

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

K:03 V4 - Wireless Edition

Download — Left half Download — Right half

How to update the firmware — K:03 V4 - Wireless Edition

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

Imperial44 v4 - Wireless Edition

Download — Left half Download — Right half

How to update the firmware — Imperial44 v4 - Wireless Edition

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

OP36

Download — Left half Download — Right half

How to update the firmware — OP36

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

Velvet v3 - Wireless Edition

Download — Left half Download — Right half

How to update the firmware — Velvet v3 - Wireless Edition

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

Velvet v3 UI

Download — Left half Download — Right half

How to update the firmware — Velvet v3 UI

Save the current layout in Entropy if needed
Download the firmware files for the left and right halves
Connect the left half via USB-C, quickly double-press Reset on the back of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

RMK — previous devices

Trackball Mini v3.0

Download — Firmware

How to update the firmware — Trackball Mini v3.0

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

QMK — current wired devices

Phenom

Download — Firmware

How to update the firmware — Phenom

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

Phenom Mini

Download — Firmware

How to update the firmware — Phenom Mini

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

Phenom Micro

Download — Firmware

How to update the firmware — Phenom Micro

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

M4CR0Pad v3

Download — Firmware

How to update the firmware — M4CR0Pad v3

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — current wired devices

SM30

Download — Firmware

How to update the firmware — SM30

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — current wired devices

K:03 v3/v4

Download — Firmware

How to update the firmware — K:03 v3/v4

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

Imperial44 v3/v4

Download — Firmware

How to update the firmware — Imperial44 v3/v4

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

Planeta v2

Download — Firmware

How to update the firmware — Planeta v2

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — current wired devices

Velvet v3

Download — Firmware

How to update the firmware — Velvet v3

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

Trackball v2

Download — Firmware

How to update the firmware — Trackball v2

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — current wired devices

K:03 PRO v2/v3

Download — Firmware

How to update the firmware — K:03 PRO v2/v3

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

HPD v2 (no modules)

Download — Firmware

How to update the firmware — HPD v2 (no modules)

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

HPD v2 (encoder/trackball)

Download — Firmware

How to update the firmware — HPD v2 (encoder/trackball)

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

HPD v2 (encoder/touch)

Download — Firmware

How to update the firmware — HPD v2 (encoder/touch)

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — current wired devices

HPD v2 (encoder/joystick)

Download — Firmware

How to update the firmware — HPD v2 (encoder/joystick)

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — previous devices and revisions

HPD v1

Download — Firmware

How to update the firmware — HPD v1

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

K:03 v1

Download — Firmware

How to update the firmware — K:03 v1

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

K:03 v2

Download — Firmware

How to update the firmware — K:03 v2

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — previous devices and revisions

Imperial44 v1

Download — Firmware

How to update the firmware — Imperial44 v1

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Imperial44 v2

Download — Firmware

How to update the firmware — Imperial44 v2

Save the current layout in Entropy if needed
Download the firmware file
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Repeat the same steps for the other half
Import the saved layout after the update

QMK — previous devices and revisions

K:02

Download — Firmware

How to update the firmware — K:02

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Planeta v1

Download — Firmware

How to update the firmware — Planeta v1

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

M4CR0Pad v1

Download — Firmware

How to update the firmware — M4CR0Pad v1

Save the current layout in Entropy if needed
Download the firmware file
Hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

M4CR0Pad v2

Download — Firmware

How to update the firmware — M4CR0Pad v2

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Remnant

Download — Firmware

How to update the firmware — Remnant

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Velvet v1

Download — Firmware

How to update the firmware — Velvet v1

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Velvet v2

Download — Firmware

How to update the firmware — Velvet v2

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

Trackball v1

Download — Firmware

How to update the firmware — Trackball v1

Save the current layout in Entropy if needed
Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

K:03 PRO v1 43 mm

Download — Firmware

How to update the firmware — K:03 PRO v1 43 mm

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

QMK — previous devices and revisions

K:03 PRO v1 65 mm

Download — Firmware

How to update the firmware — K:03 PRO v1 65 mm

Save the current layout in Entropy if needed
Download the firmware file
For the left half, hold down the top-left key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
For the right half, hold down the top-right key and connect the device via USB-C
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying
Import the saved layout after the update

ZMK — previous wireless devices

K:03 V4 - Wireless Edition

Download — Left half — standard layout Download — Left half — RuEn layout Download — Right half

How to update the firmware — K:03 V4 - Wireless Edition

Download the firmware files for the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware
Connect the left half via USB-C, quickly double-press Reset on the bottom of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
After the update, press Reset on both halves simultaneously to reconnect them

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

K:03 V4 - Wireless Edition + Qube

Download — Left half Download — Right half Download — Qube — standard layout Download — Qube — RuEn layout

How to update the firmware — K:03 V4 - Wireless Edition + Qube

Download the firmware files for Qube and the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware for Qube
Connect Qube via USB-C, quickly double-press Reset on the bottom of the case, and copy the qube file to the drive that appears
Repeat these steps for the left and right halves using the left and right files respectively
NoteDuring the update, the halves must be powered off — the power switch on the bottom must be in the off position
After the update, connect Qube via USB-C. Then turn on the left half — it should appear on Qube along with its battery level. Finally, turn on the right half

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Imperial44 v4 - Wireless Edition

Download — Left half — standard layout Download — Left half — RuEn layout Download — Right half

How to update the firmware — Imperial44 v4 - Wireless Edition

Download the firmware files for the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware
Connect the left half via USB-C, quickly double-press Reset on the bottom of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
After the update, press Reset on both halves simultaneously to reconnect them

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Imperial44 v4 - Wireless Edition + Qube

Download — Left half Download — Right half Download — Qube — standard layout Download — Qube — RuEn layout

How to update the firmware — Imperial44 v4 - Wireless Edition + Qube

Download the firmware files for Qube and the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware for Qube
Connect Qube via USB-C, quickly double-press Reset on the bottom of the case, and copy the qube file to the drive that appears
Repeat these steps for the left and right halves using the left and right files respectively
NoteDuring the update, the halves must be powered off — the power switch on the bottom must be in the off position
After the update, connect Qube via USB-C. Then turn on the left half — it should appear on Qube along with its battery level. Finally, turn on the right half

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

OP36

Download — Left half — standard layout Download — Left half — RuEn layout Download — Right half

How to update the firmware — OP36

Download the firmware files for the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware
Connect the left half via USB-C, quickly double-press Reset on the bottom of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
After the update, press Reset on both halves simultaneously to reconnect them

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

OP36 + Qube

Download — Left half Download — Right half Download — Qube — standard layout Download — Qube — RuEn layout

How to update the firmware — OP36 + Qube

Download the firmware files for Qube and the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware for Qube
Connect Qube via USB-C, quickly double-press Reset on the bottom of the case, and copy the qube file to the drive that appears
Repeat these steps for the left and right halves using the left and right files respectively
NoteDuring the update, the halves must be powered off — the power switch on the bottom must be in the off position
After the update, connect Qube via USB-C. Then turn on the left half — it should appear on Qube along with its battery level. Finally, turn on the right half

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Velvet v3 - Wireless Edition

Download — Left half — standard layout Download — Left half — RuEn layout Download — Right half

How to update the firmware — Velvet v3 - Wireless Edition

Download the firmware files for the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware
Connect the left half via USB-C, quickly double-press Reset on the bottom of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
After the update, press Reset on both halves simultaneously to reconnect them

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Velvet v3 - Wireless Edition + Qube

Download — Left half Download — Right half Download — Qube — standard layout Download — Qube — RuEn layout

How to update the firmware — Velvet v3 - Wireless Edition + Qube

Download the firmware files for Qube and the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware for Qube
Connect Qube via USB-C, quickly double-press Reset on the bottom of the case, and copy the qube file to the drive that appears
Repeat these steps for the left and right halves using the left and right files respectively
NoteDuring the update, the halves must be powered off — the power switch on the bottom must be in the off position
After the update, connect Qube via USB-C. Then turn on the left half — it should appear on Qube along with its battery level. Finally, turn on the right half

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Velvet v3 UI

Download — Left half Download — Right half — standard layout Download — Right half — RuEn layout

How to update the firmware — Velvet v3 UI

Download the firmware files for the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware
Connect the left half via USB-C, quickly double-press Reset on the bottom of the case, and copy the left file to the drive that appears
Repeat these steps for the right half using the right file
After the update, press Reset on both halves simultaneously to reconnect them

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Velvet v3 UI + Qube

Download — Left half Download — Right half Download — Qube — standard layout Download — Qube — RuEn layout

How to update the firmware — Velvet v3 UI + Qube

Download the firmware files for Qube and the left and right halves
NoteIf you want to use RuEn, download the corresponding RuEn firmware for Qube
Connect Qube via USB-C, quickly double-press Reset on the bottom of the case, and copy the qube file to the drive that appears
Repeat these steps for the left and right halves using the left and right files respectively
NoteDuring the update, the halves must be powered off — the power switch on the bottom must be in the off position
After the update, connect Qube via USB-C. Then turn on the left half — it should appear on Qube along with its battery level. Finally, turn on the right half

NoteIf a copy or disk ejection error appears while copying the firmware, simply ignore the message

ZMK — previous wireless devices

Trackball Mini v3.0

Download — Firmware

How to update the firmware — Trackball Mini v3.0

Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying

ZMK — previous wireless devices

Trackball Mini v3.1

Download — Firmware

How to update the firmware — Trackball Mini v3.1

Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying

ZMK — previous wireless devices

Trackball Royale

Download — Firmware

How to update the firmware — Trackball Royale

Connect the device via USB-C and quickly double-press Reset on the bottom of the case
Copy the downloaded UF2 file to the drive that appears — the device will restart after copying

Service firmware

RMK — reset all settings

Download — Reset firmware

How to use the reset firmware — RMK — reset all settings

Connect the device or keyboard half via USB-C and quickly double-press Reset
Copy the RMK reset file to the drive that appears
After the device restarts, install the regular firmware for your model; repeat the steps on both halves of a split keyboard

Service firmware

ZMK — reset all settings

Download — Reset firmware

How to use the reset firmware — ZMK — reset all settings

Connect the device or keyboard half via USB-C and quickly double-press Reset
Copy the ZMK reset file to the drive that appears
After the device restarts, install the regular firmware for your model; repeat the steps on both halves of a split keyboard

Русский
English